Delta Club 82 école de deltaplane près de Toulouse Montauban
Apprendre à voler en deltaplane - Trouver une école de deltaplane
Baptême de l'air en deltaplane près de Toulouse Montauban
Météo vol libre
Bibliotheque du Deltaplane
Photos de deltaplane
Vidéo deltaplane
Sites de vol libre
Occasion vol libre : deltaplane, parapente...
Les ailes et les fabricants de deltaplane
Forum du deltaplane

Le Delta CLub 82 est aussi sur Facebook
Ecole de deltaplane dans la région de Toulouse - MontaubanAgendaDivers deltaplane et vol libreDelta Club 82 Ecole de deltaplane

>>> Hang glider XTREME

Bible home » Hang glider : Xtreme

If you have additional information (ex: specificity of piloting, various characteristics...) on the hang glider Xtreme by Airwave, you can supplement his card by adding your comment or write to us :

Hang glider card : Xtreme
Name :
Manufacturer :
Year :
Pilot level :
Manual :
Document(s) :
Hang glider model :
Wing area (m²) :
Wing span(m) :
Aspect ratio :
Hang glider weight (kg) :
Minimum pilot weight (kg) :
Maximum pilot weight (kg) :
Minimum speed (km/h) :
Maximum speed (km/h) :
Max glide ratio (L/H) :
Max glide ratio speed (km/h) :
Minimum sink rate (m/s) :
Packed length (m) :
Packed length short (m) :
Number of battens :
Nose angle (°) :



The production of the Xtrem started 1.5 year before Airwave UK shut down. Only about 40 were produced mostly shipped to the US, Brazil, Japan and some in France. Was originally designed by Mark Gibson (Gibbo) (see attached picture with blue under surface) I worked on the modifications for certification. This glider can outperform most of the today' gliders in high speed glide but lacks in sink rate at low speed except in tight turn. It has a tendency to yaw and has a wide flare window. Its newer version is called the Xbow, was certified in the 138 (140 Sq ft) version 4 months before the factury shutdown (35 sold in 3 months... such a nice wing).


I have one of these ,flies great, so easy to land , but still has the airwave feel about it light in roll and pitch, love it.. but i am looking for a batten profile for one and a copy of the hand book.


I now have a batton profile ,on file so if anyone else out there needs one please email me


anyone need a manual I have one now and could pdf it .