Delta Club 82 école de deltaplane près de Toulouse Montauban
Apprendre à voler en deltaplane - Trouver une école de deltaplane
Baptême de l'air en deltaplane près de Toulouse Montauban
Météo vol libre
Bibliotheque du Deltaplane
Photos de deltaplane
Vidéo deltaplane
Sites de vol libre
Occasion vol libre : deltaplane, parapente...
Les ailes et les fabricants de deltaplane
Forum du deltaplane


Le Delta CLub 82 est aussi sur Facebook
Ecole de deltaplane dans la région de Toulouse - MontaubanAgendaDivers deltaplane et vol libreDelta Club 82 Ecole de deltaplane

>>> Hang glider PHOENIX STREAK

 Français  Search  Hang gliders list Hang gliders list  Manufacturers list Manufacturers list  Harness list Harness list 

Bible home » Hang glider : Phoenix Streak

If you have additional information (ex: specificity of piloting, various characteristics...) on the hang glider Phoenix Streak by Delta Wing Kites and Gliders, you can supplement his card by adding your comment or write to us :

Hang glider card : Phoenix Streak
Name :
PHOENIX STREAK
Manufacturer :
Delta Wing Kites and Gliders
Year :
1982
Pilot level :
-
Manual :
streak.pdf
Document(s) :
-
 
Hang glider model :
-
-
-
Wing area (m²) :
12.3
14.7
16.7
Wing span(m) :
8.85
10.6
11.4
Aspect ratio :
6.4
7.6
7.8
Hang glider weight (kg) :
25
32
37
Minimum pilot weight (kg) :
-
-
-
Maximum pilot weight (kg) :
-
-
-
Minimum speed (km/h) :
-
-
-
Maximum speed (km/h) :
-
-
-
Max glide ratio (L/H) :
-
-
-
Max glide ratio speed (km/h) :
     -
     -
     -
Minimum sink rate (m/s) :
     -
     -
     -
Packed length (m) :
-
-
-
Packed length short (m) :
-
-
-
Number of battens :
-
-
-
Nose angle (°) :
-
-
-

Add comment
Comments

 
15/01/2010
The Streak was a revolutionary design for Bill Bennett Kites. It featured a very wide nose angle, floating "trunc" tips, and a high percentage of double surface. The most unique feature was that the bottom surface was not sewn to the top surface at the rear. Instead, it "floated", and was only attached to the upper surface by means of the lower ribs being inserted through webbing loops on the top surface. Removing the lower ribs allowed the entire bottom surface to separate.